WAC Lighting EN-2460-R2 Electronic Class 2 Transformer 120V Input 24V Output 60 Watt, Black

This class 2, UL & cUL listed electronic transformer is the perfect solution for wiring multiple low voltage fixtures. Class 2 transformers are intrinsically safer transformers because they are compartmentalized to allow no greater than 5 amps of current to be drawn on each compartment. Secondary wiring for class 2 transformers do not require conduit sheathed cable or clamp wiring techniques. This transformer has a low minimum load requirement of 1W to allow the use of LED products. May be dimmed using an electronic low voltage dimmer.

• For use with WAC under cabinet & recessed lights. Transformers that end with -S include lead for Line and Straight Edge systems, and those that end with -T include a lead wire for InvisiLED 24V Tape
• Soft start, short and overload circuit protection features. 1W Min load to support low load LED systems. Intrinsically safe, Class 2 transformers permit no greater than a 5 amp current to be drawn
• Secondary wiring for Class 2 transformers does not require conduit sheathed cable or clamp wiring techniques. Non-metallic sheathed cable may be used for secondary wiring in walls and ceilings
• Input Voltage: 120V AC, Output Voltage: 24V AC, Loads vary based on Transformer 60Watt and 100Watt
• Smooth and continuous dimming with an electronic low voltage dimmer. Dimmers should always be installed on the primary side of the transformer. UL & cUL Listed for Damp Locations