Dc24v52 Turn High-power Worm Gear Dc Deceleration Motor High Torque Self-locking Forward And Reverse Deceleration Motor - Dc Motor -

High-power 24V worm gear motor, the internal dismantling of the motor is very good, the copper coil is 0.75mm thick, the carbon brush bracket also has an anti-interference capacitor inductance, the lead wire is 18AWG wire, and the deceleration worm gear is made of plastic POM material. Generally, it is not easy to be damaged if it is not overloaded. The gears in the printer are all made of this material. The worm gear reduction has an inherent advantage, that is, the shutdown can be self-locking. This function is not available in other straight gear reduction and planetary reduction.The nominal voltage of the motor is 24V. Generally, it can be used at 12-24V, and it can rotate normally even at 1V voltage. When the voltage is reduced, the maximum speed and maximum torque will be correspondingly reduced. It depends on the actual test and understanding of the actual use. The motor can also be used in common The PWM DC motor governor realizes stepless speed regulation. The stock motor has no specific parameters. Compared with the data of other similar products, it is estimated that the torque is about 6-8KG.M, and the power is about 60W-80W.The following is the no-load current and speed of the measured motor under 12V and 24V voltage as follows:Voltage 12V, no-load current 0.5A, no-load speed 25 rpm.The voltage is 24V, the no-load current is 0.6A, and the no-load speed is 52 rpm.The geared motor weighs about 1.75KG.